Processing of a ceramic tile

The ceramic tile perfectly approaches as a covering for walls or a floor in apartment, a bathroom and industrial premises. Processing of a tile and work with it demands the special tool and certain skills.

In comparison with such coverings of a floor as a carpet, linoleum or a tree the tile has many advantages if the suitable material is chosen and professionally laid:

How to replace linings in the amalgamator

Ha the bottom end there is kranovaja a sealing lining from rubber, pressure upon a lining and minerals containing in water leave appreciable traces: strong deformation and adjournment to exhaust do a lining unreliable. After untwisting of the safety screw or a safety nut it is possible to replace a rubber lining.

During this repair it is necessary to check the gate case. On its appearance and to the touch it is possible to understand, whether it has an equal surface. If it is necessary, milling of the case of the gate eliminates adjournment and corrosion traces. Enough two-three turns, differently will be removed bolshy a layer, than it is necessary.

Shuttle for a cable

Packing and storage of network wires and acoustic cables in length to 1,5-2 m — not a problem. Another matter if their length - 10 and more metres, and taking - up and unwinding are made in haste. Cable winding on any subject circular motions leads to longitudinal twisting of wires, occurrence of loops and "lambs" which in turn lead to damage of isolation and a premature exit of a cable out of operation.

We do big, convenient the extension piece

On a garden site without the electroextension piece with a cable of 20-50 metres not to manage. It is necessary and for work with a mower-trimmerom, and with other electrotools.

Happens so that among production wastes of fiber-optical cables on one of dumps in a considerable quantity there were the plastic coils concluded in demountable cases. Looking at coils, I have decided to apply them to manufacturing of extension pieces of electroconducting. Make such extension piece everyone can, caught the similar coil. For this purpose take an electricity cable of the necessary length, from one end connect to it a plug, and from another - the block of sockets. Sockets should be attached at first to a plate of any insulator (textolite, getinaks, etc.) and all to fix then on the coil. Reel up a wire on the coil and insert the coil into the case — the extension piece is ready.