Processing of a ceramic tile

The ceramic tile perfectly approaches as a covering for walls or a floor in apartment, a bathroom and industrial premises. Processing of a tile and work with it demands the special tool and certain skills.

In comparison with such coverings of a floor as a carpet, linoleum or a tree the tile has many advantages if the suitable material is chosen and professionally laid:

- Almost boundless possibilities of combinations and registration;

- Good stability to the big loadings;

- High stability against dampness and aggressive substances;

- Very high profitability thanks to small cost. Cost of operation within 20 years of the floor covered with a tile, makes only about 25 % of cost of operation of the same area of a floor with an artificial covering.

The ceramic tile can be processed well only special tools. Cutting torches and circular saws for cuts of firm surfaces should be covered by a firm alloy. Cutting lobzikovye files which can be tense in usual nozhovku on metal, are similarly covered by parts of a firm alloy or tiny diamond splinters.

Splitting of a ceramic tile

The tile consists of a fragile material of various durability. They receive the durability because of a covering of the top surface glaze. If glaze is cut by a tiled cutting torch even the thickest tile can be pulled down on this risk with rather small effort. The cutting torch for a tile on the mobile cutting carriage has a metal emphasis in the form of cross-section V with which help the tile can be broken on a cut.

Beautiful cutting down of a ceramic tile

The cuttings down going from edge of a tile, most easier to do by a tiled saw or vysechnymi nippers. The tiled saw should be with lobzikovym a cloth revetted with particles of a firm alloy or diamond. A direction has spent on drink can be changed at any time without replacement of a cloth of a saw. With vysechnymi nippers for a tile regional cuttings down become small slices.

For cuts with the standard sizes, for example for angular gates or sockets, is standard on the size revetted with a firm alloy narrow nozhovki or dyroprobivnye devices. In dyroprobivnom the device the ceramic tile is strong clamped between corresponding to the size of cut by a metal ring and a gear funneled casing. The tile is fixed by it so that cut in a ring can be beaten out a tiled hammer without fear that the tile will slip out. Regulated tsirkulnym it is possible to do by a tiled cutting torch apertures from 20 to 94 mm in diameter. It is put in action by a drill with the maximum quantity of turns.

1. For a fajansovo-ceramic wall tile enough simple manual stekloreza with an edge from a firm alloy and a steel square for right angle applying.

2. The adjustable directing template for scraps allows with exclusively equal form, at any angle to cut a tile considerable quantity.

3. The tiled saw is conducted always at right angle to a tile and pushes to prevent a glaze splitting off on an edge.