They are irreplaceable at pilenii a tree of the big section. Thick logs and a bar are good for sawing manual chain, tandemnymi, sablevidnymi and universal saws. Modernisation of similar saws has essentially expanded their application.
The chain electric saw and goats guarantee convenience and safety in work. The log reliably lies on goats from the chromeplated steel, and the adjustable emphasis sets the size of a sawn off part. The chain saw with a protective casing and the tightening adaptation fastens to goats that allows to work with it one hand.
The chain electric saw is the optimum tool when it is required to saw fire wood. Pilenie occurs in regular intervals, and the long tyre with a chain (a minimum of 30 sm) does accessible even thick trunks of trees. Safety of saws has during the last years increased also. Design features excluding casual inclusion, an instant stop of a chain at return and a protective board became already the standard. Additional safety is provided with the special fitting and strong clothes reducing risk of traumas in the field of feet and a stomach. The protective lining contains numerous long fibres which at contact with a chain easily escape from a fabric in trousers and block a chain wheel that leads to an instant stop of a saw.
As a rule, these cars give rough and not equal saw cuts. The new models completed with a special bed and a parallel emphasis, have solved this problem and have created possibility of their rather various use. By means of a chain saw it is possible to work only with a tree.
For opilivanija trees and branches in a garden sabre pendular saws are very convenient. Possessing a thin mobile cloth, they easily saw in immediate proximity from edge. For these saws there is a wide choice pilnyh cloths and the nozzles, allowing to saw almost any material and in not absolutely usual conditions. Having replaced a cloth with a file or a metal brush, it is possible to delete a rust successfully.
Universal tandemnye saws for exact raspilov
In the motionless directing tyre two working cloths pendular movements in opposite directions allow to make exact pilenie wood, plastic and even foam concrete. It is possible to do by such saw through apertures in a material file. The design of these universal and enough powerful saws (above 1000 Vt) provides convenience, safety and multi-purpose application (even saws fire wood).
Saws with special nozzles
Such disk saw can become chain. As disk it gives depth has spent on drink 54 mm, and as chain - 200 mm. Such saw it is possible to saw directly and at an angle. At preparation of fire wood a saw fix to goats the special folding adaptation. It successfully consults and with usual work. Strong goats on whom the log lies, still remain the most reliable support at work with a chain saw. The chain saw can be equipped by an adjustable bed and a parallel emphasis that allows to make raspil at an angle (to 45 hailstones.). The protective armature provides safety from below.
Pendular sabre saws for any materials
By means of special nozzles sabre saws become even more multilateral in application: by means of a long cloth, the sabre saw can make raspil very close to edge. By means of this nozzle business goes is even easier and faster. Slightly caving in, the cloth at podpilivanii does not damage a material. The multi-purpose pendular sabre saw completed with replaceable special cloths, equally easily saws a tree, plastic or metal. For a file of fire wood the mechanical holder who easily fastens on a basic part of a saw is offered. Having established instead of nozhovochnogo cloths a file, a rasp or a brush, you in addition will expand scope of application of this car.
The sabre pendular saw is irreplaceable at repair of apartments. It will easily remove an old paint from any surface, and consistently changing cloths, it is possible to saw easy the multilayered design consisting of metal, a tree and an artificial stone (a brick or concrete). Will allow to work in hard-to-reach spots.
Universal saws as the decision of problems
The universal saw helps to work with the house and a garden. For removal of bushes and small trees this saw is simply irreplaceable, thanks to the compactness it works even in bottlenecks. And she is able not only to saw. Such saw on the accumulator happens simply irreplaceable. When it is required to work as a multipurpose saw in places removed from the electric system, the saw on accumulators to the aid will come.
Security measures at work with chain saws:
Before assemblage of a saw and chain installation necessarily familiarise with the instruction on its operation. About features of the saw which have interested you is better to learn even before its purchase.
To work with a power saw follows in mittens, goggles and a helmet. In much, safe work will be promoted by skintight working clothes and strong footwear.
In that place where works with a chain saw are conducted, there should not be strangers.
At work it is necessary to accept steady and safe position. The material for sawing up should settle down steadily.
Saw always conduct two hands that it constantly remained under control. A gear emphasis establish on a log (bar) prior to the beginning pilenija.
No comments:
Post a Comment